Great service! Incredibly quick delivery. Even when it went over the 48hour delivery time I contacted them and they organised a private driver to deliver to my new address before leaving the country. Really happy with the product also.
Bambu Lab P2S 3D Printer with AMS 2 Pro
or 4 x S$312.25 with
Description
- 5-Inch Touch Screen
- AI Failure Detection
- Auto Flow Dynamics Calibration
- Multi-Color Printing
- Cold-Air Cooling
- Active Venting Filament Drying
- 256*256*256 mm³ Print Volume
Continue Reading
Collapse
Delivery & Returns
Official Warranty
Secure Payment
-
Item Specification Printing Technology Fused Deposition Modeling Body Build Volume (W*D*H) 256*256*256 mm³ Chassis Plastic and Steel Outer Frame Plastic and Glass Physical Dimensions Physical Dimensions 392*406*478 mm³ Net Weight 14.9 kg Toolhead Extruder Gear Hardened Steel Nozzle Hardened Steel Max Nozzle Temperature 300 °C Included Nozzle Diameter 0.4 mm Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm Filament Cutter Built-in Filament Diameter 1.75 mm Extruder Motor Bambu Lab High-precision Permanent Magnet Synchronous Motor Heatbed Build Plate Material Flexible Steel Plate Included Build Plate Type Textured PEI Plate Supported Build Plate Type Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack Max Heatbed Temperature 110 °C Speed Max Speed of Toolhead 600 mm/s Max Acceleration of Toolhead 20,000 mm/s² Max Flow for Hotend (Standard Flow Hotend) 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature) Air Purification Activated Carbon Filter Type Granulated Coconut Shell VOC Filtration Supported Particulate Matter Filtration Supported Cooling Part Cooling Fan Closed Loop Control Cooling Fan for Hotend Closed Loop Control Auxiliary Part Cooling Fan Closed Loop Control Filament Supported PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG CF, ABS GF, ASA-CF, PA6-CF, PA6-GF, PAHT CF, PPA-CF, PET CF Sensor Camera Built-in; 1920*1080; 30 fps HD Door Sensor Supported Filament Run Out Sensor Supported Filament Tangle Sensor Supported Filament Odometry Supported with AMS Power Loss Recovery Supported Electrical Requirements Voltage 100-120 VAC / 200-240 VAC, 50/60 Hz Max Power* 1200 W@220 V / 1000 W@110 V PLA Steady-State Power 200 W@220 V / 200 W@110 V（PLA printing） Electronics Touchscreen 5-inch 854*480 Touchscreen Storage Built-in 8 GB EMMC and USB Port Control Interface Touchscreen, mobile App, PC App Motion Controller Dual-core Cortex-M4 and Single-core Cortex-M7 Application Processor Quad-core 1.5 GHz ARM A7 Neural Processing Unit 2 TOPS Software Slicer Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. Supported Operating System MacOS, Windows, Linux Network Control Ethernet Not Available Wireless Network Dual-Band Wi-Fi Network Kill Switch Not Available Removable Network Module Not Available 802.1X Network Access Control Not Available Wi-Fi Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC) Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) Wi-Fi Protocol IEEE 802.11 a/b/g/n * To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes
Bambu Lab P2S 3D Printer with AMS 2 Pro
Sale priceS$1,249.00
Regular priceS$1,369.00 (/)
The User Experience As Good As A Smartphone.
5-inch Touch Screen | 2nd-Gen UI
The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.
PMSM Servo Architecture ｜ DynaSense Extruder
70% More Extrusion Force & Real-Time Error Detection.
The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flow rate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.
Active Flowrate Compensation ｜ Eddy Current Pressure Sensor
Print Smooth At Every Corner, Always.
The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.
Adaptive Airflow System
Perfect Overhang No Matter the Filament or Temperature.
Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs.
Cold-Air Intake ｜ Cooling Mode
Adaptive Airflow System
50°C Chamber Ready For Engineering-Grade Filaments.
The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping, all while maintaining clean, safe air quality in your workspace.
Heat Preservation ｜ Carbon Filter
Peace Of Mind, Everytime You Print.
The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.
AI Error Detection ｜ 2 TOPS NPU
Start Check
Spaghetti
Nozzle Clumping
Purge Chute Jam
30-Second Nozzle Swap.
The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors.
Quick Swap Hotend ｜ 1-Clip Design
No-Lag Liveview & High-Quality Timelapse.
Enhanced LED lighting dramatically improves the clarity of your live view video and timelapses. Paired with a high-frame-rate camera & Dual-band Wi-Fi, you can comfortably monitor your printer remotely and capture beautifully illuminated timelapses perfect for sharing on social media.
"Stage" Lighting ｜ 1080P High-Rate Camera
Reliable for Fiber-Reinforced Material Printing.
P2S's extrusion system and nozzle are crafted from hardened steel, offering exceptional durability and wear resistance. Designed specifically for stable, long-term printing of high-performance fiber-reinforced materials.
Hardened Steel Nozzle ｜ Hardened Steel Extruder Gear
AMS 2 Pro
Multi-Color Printing & Filament Drying, All in One Box.
Experience Bambu Lab's most reliable multi-color printing system yet. The AMS 2 Pro features an enhanced design for a better user experience and, crucially, introduces long-awaited filament drying. A pioneering active venting system dries filament 30% faster than sealed heating, maintaining low humidity for superior storage and print quality.
Auto Venting Filament Drying ｜ Multi-Color Printing
Electromagnetic Air Vent
Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.
Perfection, Detail by Detail.
The P2S features numerous refinements that enhance the user experience. While these incremental improvements may not be immediately apparent, they embody the level of perfection Bambu Lab constantly pursues.
Built-in 2-in-1 Buffer (equipped with AMS combo)
Effortlessly switch between your AMS and external filament spools for maximum flexibility.
Flat Base Plate
The smooth, flat surface makes it simple to swipe out all residue, keeping your printer clean.
Integrated Lift Handles
Designed for safe and easy transport, these sturdy handles protect your hands and provide a secure grip when moving the printer.
Shatter-Safe Front Glass
Engineered for safety, the front glass is protected by a film built to resist shattering, protecting you and your workspace.